for RCS5T
View
- Individually wrapped
- 5 micron rating
- Made from coconut shell carbon
- Fits 10 inch standard filter housings
- Removes chlorine, bad odor and taste
- NSF/ANSI 58 Certified: Independently tested and certifi
View
- Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
- Rated at 5 microns
- Bonded Pac media with polyolefin pre-filter and polyethylene netting
- Initial pressure drop of 3.4 psi at
View
- 10" x 2" Post Carbon Filter replacement cartridge. 1/4" connections.
- Used as the 5th stage on iSpring RO systems. It can also be used for refrigerators, ice makers, coffee machines, water coolers and more.
- Removes chlorine, tas
Out of Stock
$17.99
View
Write Review
- 500GPD membrane saves 60% of water, with 1:1 drain to clean water ratio
- Low-pressure and high-capacity membrane for tankless direct ro output
- Fits updated iSpring light commercial RO system RCS5T
- Rejects wide spectrum of impurities d
View
- Multi-layer gradient design. This filter can also be used for pool and hottub.
- 2. 5 inch (O. D) x 10 inch (length) x 1 1/8 inch (I. D), fits industry standard 10 inch filter housings
- Good for ro, counter-top, whole-house water f
iSpring FG15 NSF/ANSI 58 Certified GAC Granular Activated Carbon 2.5"x10" Water Filter Replacement, 2.5" x 10" (FG15)
Individually wrapped
5 micron rating
Made from coconut shell carbon
Fits 10 inch standard filter housings
Removes chlorine, bad odor and taste
NSF/ANSI 58 Certified: Independently tested and certified to meet NSF/ANSI 58 standards, ensuring reliable removal of harmful contaminants for safe, high-quality drinking water.
iSpring FC15 NSF/ANSI 58 Certified Standard 10 inch CTO Carbon Block Water Filter Cartridge Replacement, 5 Microns (FC15)
Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
Rated at 5 microns
Bonded Pac media with polyolefin pre-filter and polyethylene netting
Initial pressure drop of 3.4 psi at a flow rate of 1 gpm
Water temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
NSF/ANSI 58 Certified: Independently tested and certified to meet NSF/ANSI 58 standards, ensuring reliable removal of harmful contaminants for safe, high-quality drinking water.
iSpring FT15 NSF/ANSI 58 Certified 5th Stage Inline Post Carbon Filter Replacement Cartridge, White (FT15)
10" x 2" Post Carbon Filter replacement cartridge. 1/4" connections.
Used as the 5th stage on iSpring RO systems. It can also be used for refrigerators, ice makers, coffee machines, water coolers and more.
Removes chlorine, tastes, and odors in the water.
Individually wrapped.
Depending on your water usage and quality, replace every 6-12 months.
NSF/ANSI 58 Certified: Independently tested and certified to meet NSF/ANSI 58 standards, ensuring reliable removal of harmful contaminants for safe, high-quality drinking water.
Out of Stock
$17.99
iSpring MS5-N 500GPD Reverse Osmosis (RO) Membrane Replacement 3.0" x 11.7", Fits RCS5T, Updated Version (MS5-N)
500GPD membrane saves 60% of water, with 1:1 drain to clean water ratio
Low-pressure and high-capacity membrane for tankless direct ro output
Fits updated iSpring light commercial RO system RCS5T
Rejects wide spectrum of impurities down to .0001 micron
Tolerance to a wide range of operating conditions
iSpring FP15 NSF/ANSI 58 Certified 5 Micron 10"x2.5" Standard Sediment Water Filter Filter Cartridges (FP15)
Multi-layer gradient design. This filter can also be used for pool and hottub.
2. 5 inch (O. D) x 10 inch (length) x 1 1/8 inch (I. D), fits industry standard 10 inch filter housings
Good for ro, counter-top, whole-house water filters and ice machine, film, beverage processing
Genuine filter cartridge Supply
NSF/ANSI 58 Certified: Independently tested and certified to meet NSF/ANSI 58 standards, ensuring reliable removal of harmful contaminants for safe, high-quality drinking water.