for RCC1D Series
View
- Individually wrapped
- 5 micron rating
- Made from coconut shell carbon
- Fits 10 inch standard filter housings
- Removes chlorine, bad odor and taste
View
- Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
- Rated at 5 microns
- Bonded Pac media with polyolefin pre-filter and polyethylene netting
- Initial pressure drop of 3.4 psi at a flow rate of
View
- Re-fillable DI filter for RO DI system
- 2.5" x 10" inline filter
- Fits most RO DI systems, including brand name models
- Refill 0 ppm Ion DI(De-Ionized), remove hard water material from the water and create 0-1ppm
- Reducing TDS level in the
View
- 10" x 2" Post Carbon Filter replacement cartridge. 1/4" connections.
- Used as the 5th stage on iSpring RO systems. It can also be used for refrigerators, ice makers, coffee machines, water coolers and more.
- Removes chlorine, tastes, and o
View
Write Review
- Protect Your Family and Household Appliance from Sediments: The FP series sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water
View
Write Review
- Typically the first stage for any water filtration system, the sediment filter removes dirt, rust, sand, and other particles from the water. This filter can also be used for pool and hottub.
- Made of 100% Melt-Blown Polypropylene, multi-layer f
View
Write Review
- Dedicated RO membrane for iSpring RCC1D & RCC1DP RODI reverse osmosis system. Replace every 2-3 years for optimal performance
- Rated at 150 gallons per day with up to 2:1 pure water to waste water ratio, the MC150 is four times more effici
View
- Multi-layer gradient design. This filter can also be used for pool and hottub.
- 2. 5 inch (O. D) x 10 inch (length) x 1 1/8 inch (I. D), fits industry standard 10 inch filter housings
- Good for ro, counter-top, whole-house water filters and
iSpring FG15 GAC Granular Activated Carbon 2.5"x10" Water Filter Replacement, 2.5" x 10" (FG15)
Individually wrapped
5 micron rating
Made from coconut shell carbon
Fits 10 inch standard filter housings
Removes chlorine, bad odor and taste
iSpring FC15 Standard 10 inch CTO Carbon Block Water Filter Cartridge Replacement, 5 Microns (FC15)
Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
Rated at 5 microns
Bonded Pac media with polyolefin pre-filter and polyethylene netting
Initial pressure drop of 3.4 psi at a flow rate of 1 gpm
Water temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
iSpring FD15 DI Deionization Filter RO/Aquarium 10" x 2.5", Clear (FD15)
Re-fillable DI filter for RO DI system 2.5" x 10" inline filter Fits most RO DI systems, including brand name models Refill 0 ppm Ion DI(De-Ionized), remove hard water material from the water and create 0-1ppm Reducing TDS level in the water Easy to add-on
iSpring FT15 5th Stage Inline Post Carbon Filter Replacement Cartridge, White (FT15)
10" x 2" Post Carbon Filter replacement cartridge. 1/4" connections.
Used as the 5th stage on iSpring RO systems. It can also be used for refrigerators, ice makers, coffee machines, water coolers and more.
Removes chlorine, tastes, and odors in the water.
Individually wrapped.
Depending on your water usage and quality, replace every 6-12 months.
iSpring FP110 10 micron 10"x2.5" Standard Sediment Water Filter Replacement Cartridges (FP110)
Protect Your Family and Household Appliance from Sediments: The FP series sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water filtration system to prevent the filters that follow from getting clogged too soon. This filter can also be used for pool and hottub.
Standard Size: Our filter fits standard 10” x 2. 5” housings, including brand name models
Top-Notch Quality: The FP series high capacity polypropylene sediment filter is able to achieve filtration down to 1, 5, 10, 20, 50 microns. The filters are tested by an independent third-party to meet NSF/ANSI standards. They have a capacity that is enough to supply a family of four with clean water for half a year (depending on your water quality). The 10” x 2. 5” filter cartridges have a minimum impact on water flow and require minimum maintenance.
Peace of Mind Customer Service: Register online to activate your extended manufacturer and life-time free tech support from U. S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please Note: The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.
iSpring FP120 20 micron 10"x2.5" Standard Sediment Filter Cartridges, 15,000-Gallon, Multi-layer (FP120)
This filter can also be used for pool and hottub.
iSpring FP11 1 micron 10"x2.5" Standard Sediment Water Filter Replacement Cartridges (FP11)
This filter can also be used for pool and hottub.
iSpring FP150 50 micron 10"x2.5" Standard Sediment Water Filter Replacement Cartridges (FP150)
Typically the first stage for any water filtration system, the sediment filter removes dirt, rust, sand, and other particles from the water. This filter can also be used for pool and hottub.
Made of 100% Melt-Blown Polypropylene, multi-layer filtration.
Depending on your water usage and quality, it should be replaced every 3-6 months.
ANSI/NSF STANDARD 42 COMPONENT - Tested by independent third-party. Genuine iSpring filter sold directly by the manufacturer.
Fits standard 10" filter housings, including most name brand models.
WELL PACKED and individually wrapped
iSpring Greatwell MC150 RO Membrane Reverse Osmosis Replacement water Filter for RCC1D & RCC1DP RODI Water Filtration System, 150 GPD (MC150)
Dedicated RO membrane for iSpring RCC1D & RCC1DP RODI reverse osmosis system. Replace every 2-3 years for optimal performance
Rated at 150 gallons per day with up to 2:1 pure water to waste water ratio, the MC150 is four times more efficient than traditional RO membranes
Removes up to 99% of over 1,000 contaminants, including lead (up to 98%), chlorine, fluoride, arsenic, asbestos, calcium, sodium, and more
Ensures a rapid flow rate of up to 0.1 GPM, providing high-efficiency filtered water for demanding applications without compromise
Peace of Mind Customer Service - Register online to activate your manufacturer warranty and life-time free tech support. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help
iSpring FP15 5 Micron 10"x2.5" Standard Sediment Water Filter Filter Cartridges (FP15)
Multi-layer gradient design. This filter can also be used for pool and hottub.
2. 5 inch (O. D) x 10 inch (length) x 1 1/8 inch (I. D), fits industry standard 10 inch filter housings
Good for ro, counter-top, whole-house water filters and ice machine, film, beverage processing
Genuine filter cartridge Supply