J. Griffiths |
2018-03-13

as described exact fit for 20" water filter, see picture I have 3 filters cartridges in line, Sediment, Carbon and Iron Manganese. I change the sediment filter every 3 months, the carbon every 6 and the Iron.manganese every 12 moths, works for me.

pbnoj |
2020-11-30

I retrofitted this iSpring filter & housing into my current whole house water filtration system. My system, prior to the FM25B installation, did a great job of removing particulate & chlorine from my public water but actually exacerbated the mold growth in my sink drains & faucet aerators, shower heads, due to the lack of chlorine. After reading up on this phenomenon I found that the culprit is residual iron & manganese in the water, which w/ the lack of chlorine to counteract the oxidation, actually promotes the growth. Thus the addition of the iSpring iron & manganese filter as the last stage in my system. Voila' , the mold is gone! No pink or brownish/black mold in the sinks, shower, etc. A 2nd benefit is that the water is now also significantly softer. I consulted w/ iSpring customer service rep Francis a couple of times prior to my purchase. He was extremely helpful, filling me in on the filter details, e.g. Fe & Mn particulate size limits. He even recommended that I contact my local water authority to verify what those #s are. FYI - that was a bit of a challenge given that these metals are NOT regulated by FDA guidelines & only measured against "recommendations". Smaller is better obviously because this determines the life of the filter. This is no small concern given the cost of the filter. Replacing it 1-2x per year is financially viable, 1/mo isn't. And finally, given the size of the filter and that it's added to my current system I decided to include a pressure regulator after the last filter stage (see pix) expecting that there'd be a pressure drop that I'd have to accommodate for. In the end, all is good, problem solved & pressure is still very good.

Kodiak |
2020-05-12

Have had this for a couple of years now after having horrible manganese issues from our well water. Had priced an iron breaker but it was way too spendy. These are just the ticket. I have the iron/manganese filter along with a carbon filter. Where we notice it the most is our toilets. They stay much cleaner with a fresh filter. When they start getting brown reside its time to change it, usually about every 9 or 10 months. Great customer service as well and Amazon has the best prices and are direct from the manufacturer.

Don Scrutchfield |
2019-08-03

Works as specified. Removes iron from the water supply. Highly recommended.

0 0 |
2019-05-26

It has been working great for our whole house system.

Frank Varela |
2019-02-22

Works for us. We had iron staining on toilets before this and after installing this it was much better. And our water has no more bad smell!

Jose Coello |
2019-02-21

Works great! Combined with a pleated filter, takes almost all the rust out!

JOHN RODRIGUES |
2018-06-29

Good solid product. Fits well in our whole house system. Last me a whole year.

Murray Palmer |
2018-06-21

We live in an area with crappy high iron water. I sometimes have difficulty washing whites because our water leaves iron stains on them. After installed this iron-reducing filter my water was clearer and cleaner! I can wash whites without spots, and the handmade soaps we use not longer leave sticky soap scum on the tubs and sinks.

Tami Martin |
2018-05-24

Came quick and works properly