Steve Judge |
2018-07-27

quality is evident over other such units

Lucas Harral |
2018-07-15

Warehouse sales price plus a further discount made this purchase worthwhile, especially when I wanted a spout that would rotate 360-degrees instead of the existing fixed in place neck. A ceramic disk for the valving will help avoid problems with my hard water leftovers as I only filter with a 5 year life cartridge for this faucet spout (and use that prefiltered water in a steam distiller to produce pure water).Used the adapter cover for larger holes and installation was straight forwarded but two persons help out with positioning in place as the other tightens the holding nut under the sink. In my case I used masking tape in place of a second person to hold alignment and when that wasnt enough, I used a wood clamp and more masking tape to keep the wood clamp in place while I tightened the water connecting nut which could cause the entire assembly to move and mess up your faucet handle alignment. I didnt bother installing the parts for the water connection because the old spout had the same setup for connecting except the inserts were brass and probably make for a more secure connection.The spout does rotate 360 degrees and I dont suffer a after drip problem some have mentioned. Action on the handle lever is nice. I found the spout neck to be a little sloppy in its seat and can be wiggled around but other than that I see no problems.Might mention the water line that feeds the house has a typical water pressure reducing valve on it (Zurn-Wilkins) set at 50psi versus the 120psi street pressure feeding it (120psi great for fire hydrants but tough on toilet, sink, shower and washing machine valves).I have an antique brass main sink faucet with side spray but a matching filtered faucet was expensive even with discounts since the brushed nickel seems to blend right in and was around $15, suits me fine.

Richard Miller |
2018-07-09

I like the faucet just wonder why its a 1/4 inch line instead of 3/8 like all the others- need a compression fitting to hook up to a standard 3/8 line.

Jim Benesch |
2018-06-17

everything just works his is a pretty cool product for a good price. Im very pleased with this purchase. Good, its good quality suprised me. Good value. brilliantly designed a good feeling

tom king |
2018-06-15

I show my friend this item and my friend bought one. Overall a fantastic product that I would definitely recommend. theyd be perfect. Great product. Easy to work with, sent quickly, lovely to look at. Couldnt be happier. Plan to order more!!! I strongly and highly recommend them. Special design, perfect quality, nice appearance. I couldnt deny such a good product. I will be recommending it to my friends

Eduard Khaperman |
2018-05-31

Very satisfied with the purchase . love the water flow

Tai Nguyen |
2018-05-23

Very nicely constructed. It is pretty big, so keep that in mind if replacing a smaller drinking water faucet.

Sam Tripathi |
2018-05-22

Bought this to match my Moen brushed Nickel kitchen faucet. About as close in geometry and color as any other RO faucet I researched. Paired with a Kinetico K5 RO machine. Very happy!

Donna Bonino |
2018-05-15

It works, and looks great. I actually am not using this with a full water filter system, but just have it hooked up to a line filter (normally for behind the fridge I think) with it supplied by soft water.

Rpnald Green |
2018-04-27

Very nice RO Faucet for the money, the few that left negative reviews I believe were looking for a faucet at 10x the cost. You get what you pay for :)We have no issues with the faucet, its a substantial upgrade above what is typically included in an RO kit.