x

x

Triple the Savings, Triple the Joy!

Code:BLACK250-Save $250 on Orders Over $1000

Code:BLACK100-Save $100 on Orders Over $500

Code: BLACK50-Save $50 on Orders Over $300

Ready to start your business? BECOME A DEALER

EARN UP TO 5% COMMISSION FOR EVERY SUCCESSFUL REFERRAL

Contact us

tanks

iSpring T32M Pressurized Water Storage Tank

iSpring T32M Pressurized Water Storage Tank with with Ball Valve for Reverse Osmosis RO Systems, 4 Gallon

$45.99

Triple the Savings, Triple the Joy!

Code:BLACK250-Save $250 on Orders Over $1000

Code:BLACK100-Save $100 on Orders Over $500

Code: BLACK50-Save $50 on Orders Over $300

Valid Date: 11.21.2024 -12.02.2024.

About this item

4 Gallon Metal Pressurized Tank with up to 3. 2 Gallon Holding Capacity
Stainless Steel 1/4" NPT Valve Thread
Made from FDA listed, food grade material (Tested by independent third-party to meet NSF/ANSI standard)
Discharges effectively in both vertical and horizontal position
Pre-pressurized between 7-10 psi for common use

Frequently Bought Together

iSpring T32M Pressurized Water Storage Tank with with Ball Valve for Reverse Osmosis RO Systems, 4 Gallon

$45.99

Reverse Osmosis Tank

T32M

How does it work?

iSpring pre-pressurized tanks are perfect for use in under-sink water storage with your reverse osmosis system. The RO process is on the slower side, so a pressurized storage tank is typically required to supply water from the system on demand. Your RO system will fill the tank to capacity, and when you open your RO water dispenser, the water is sent out by the tank's pressurized air bladder.

All tanks have a maximum working pressure of 100 psi.

iSpring Pre-pressurized tanks are tested by independent third party against NSF/ANSI standard (61 for Drinking Water System Components) for material safety and structural integrity requirements, 2018

iSpring tanks have a special surface treatment on the metal body that prevents rust and dent.
All of our metal tanks pass pressure tests before we ship them out to customers.

Unlike traditional plastic, stainless steel that does not break or strip easily is used in our tank valve thread and pressure check valve.
Inside all iSpring tanks, a durable butyl diaphragm with post-cure procedures provides a tasteless and odorless water chamber.

Tank

Water Tank

Availability: In Stock
Model: T32M
Manufacturer: iSpring

Reviews with images

See all customer images

Write Review

Your Name: *

Email *

Your Review: *

Enter the code into the box then submit: *

AmazonUser |

2018-06-05

I added this tank to my existing RO tank, and I now no longer run out of water when filling a pot or large water container (like my growler). My 64 oz growler used to take a long time to fill, because the water pressure would drop so low when the original RO tank was getting nearly empty. With the addition of this tank in the system, there is now more than enough capacity left after filling the 64 oz growler, so it fills all 64 oz quickly.

In order to add this in to my system, I purchased a valve for the top of the tank ( JG Speedfit PPSV501222WP 3/8-Inch by 1/4-Inch NPFT Female Elbow Shut Off Valve ) and a tee ( JG Speedfit PP0212WP 3/8-Inch OD Union Tee ). I had enough remaining 3/8" plastic pipe left over from the initial installation, otherwise you would need some of that as well. It would be similar to John Guest Blue 100 ft/roll 3/8" Polyethylene Tube Tubing Drinking Water RO Reverse Osmosis DI Aquarium Pipe LLDPE , however, you would likely only need a few feet.

16

>
>>

How to use

Warranty Registration & Help Center

support-Warranty-registration

support-live-chat

support-ticket

support-email

Tell us about your shopping experience

support-amazon

support-home-depot

support-lowes

support-gmail