INSTALLATION:
1. Turn off the Cold Water shut-off Valve.
2. Turn on the Faucet to release any pressure. Disconnect the Existing Faucet Connector Pipe.
3. Make sure the O-ring is seated inside the Feed Water Adapter female end then Twist it onto the Cold Water Supply Valve.
4. Twist the Existing Faucet Connector onto the male end of the Feed Water Adapter.
5. Turn off the Feed Water Valve. Turn on the Cold Water Supply Valve slowly, ensure you are getting a proper seal.
6. Connect the 1/4” tubing to the push-fit side of the Feed Water Adapter. Open valves and check for leaks.
.jpg)
