iSpring RCS5T 500 GPD Residential and Light Commercial Tankless Reverse Osmosis Water Filter System with 1.5:1 Pure to Drain Ratio
About this item
- Designed to supply for large families, small restaurants and small businesses
- Produces up to 500 GPD or 0.34 gpm under ideal conditions. The actual output could vary from 70% to 90% of the 500GPD due to temperature, water chemical properties, and other factors. Filtered water output is about 40-70 psi on average.
- RO membrane with 1.5:1 pure to drain ratio
- 5 stages of filtration remove up to 99% of 1, 000+ pollutants including PFAS, chlorine, fluoride, lead and more.
- Light commercial capable - add a storage tank for light commercial settings
Frequently Bought Together
![](http://123filter-com.b-cdn.net/ac/image/thumbnails/19/b5/RCS5T_main_new_jpg-105300-750x750.jpg)
iSpring RCS5T 500 GPD Residential and Light Commercial Tankless Reverse Osmosis Water Filter System with 1.5:1 Pure to Drain Ratio
$649.99
- Availability: In Stock
- Model: RCS5T
- Manufacturer: iSpring
Write Review
![5 out of 5 Stars!](http://123filter-com.b-cdn.net/ac/extensions/123filter/storefront/view/123filter/image/stars_5.png)
2015-08-10
Please see update below.
We live in the Dominican Republic where even the city water is not so good so we had a whole house (+2 apts.) and animals using a filter and UV system for over 15 years. We have not had any city water for over 18 months now and in severe drought. We also have rain water systems to collect but with no rain, no water. Water trucks have over tripled their costs and the water that they deliver is from one of the most polluted rivers around. You DON'T want to know what we found when we cleaned it.
We finally put in a well and hit water at 30 feet. We are on the Ocean so expected some salt but hit good water above sea level. The aquifer is mainly in petrified coral so very high in calcium. Everyone here has 3rd world septic systems so that also added to concern. But the water was OK for the lawns (aka extra pasture), gardens and horses. Word got around about my well and in 2 months, at least 20 wells drilled within 1/4 mile. The well water became unusable for anything as many went too deep and let the sea water inter as the fresher water was sucked up. We also noticed a very bad algae/bacteria problem in our pools and 2 cisterns.
After much research and questions to Helen @ iSpring, we bought this unit. (THANK YOU HELEN!) We concentrated on what we had and what we needed to accomplish. Electric is also very dirty here so we are 90% solar with a good inverter and battery systems. Importing anything is expensive to ship and the custom taxes are outrageous. We needed to get this right the first time. Not worth shipping it back.
Since most of our water systems are in a dedicated room, it was fairly easy to get up and running in a few hours with no real expertise needed. Advanced planning may be very important.
1. A couple of changes so that the well is dedicated to this RO system.
2. Well water goes through a de-scalar. (we already had so we just moved it.)
3. to an old sand filter that we cleaned up.
4. to a UV sanitizer that we already had. (I didn't want the bacteria and algae getting into the rest of the system. Though the RO will handle some/much/?? it may not be able to kill and separate all.)
5. 30 gallon pressure tank equipped with gauge, well pump on/off pressure switch, tank drain and connection to the RO.
6. Followed or figured out the RO system and hung it on the wall. (instructions are very poor so it took awhile)
7. New elec. serge protector mounted. Shelf for filters.
8. The RO fresh water line goes directly into our non-pressurized cistern. No other pump needed.
9. Waste water run into PVC drip pipes into the gardens. No other pump needed.
10. Prior to the unit arriving, we transferred around 7,500 gallons from this cistern into our second one to go in and scrub/sanitize it. Lot's of algae (and other stuff that you don't want to know about.).
11. Turn on well pump, fix a couple of leaks and open valve to RO and plugged it in.
12. Being that our cistern my have other contaminants leach in or I need trucked water added, that independent system also has it's own filters and UV.
Observations:
1. Our 1 hp well pump will only give us around 65 psi while the best production would be at 75psi. (or higher?) I set my well pump controller at 42/62.
2. At that pump settings, I was getting 540 gallons per day.
3. Though I have not had the water tested yet, It is clear, no smell and tastes great.
4. The motor is very quite.
5. I have had NO issues in the week that I have had it running; 24 hours every day.
6. Electric usage is not a problem with our systems.
7. Waste water is doing great with my plants and even that is a lot cleaner.
8. Filters are available and good prices.
I have read the Q&As and comments and thank those that have posted and most I agree with. Again to Helen.... THANKS for your support @ iSpring.
After just a few days, we are very satisfied with this unit. We will give it a couple more weeks but I've already picked a spot for a second unit to be mounted right next to this one.
(the name that appears as the author is my wife... lol)
9/22/15 UPDATE:
Our 1st unit has worked at just about full production running 24/7 since we put it in. We just installed 2 more and up in running within a couple of hours of getting them and had everything planned so it was real easy for us being that we had worked through the instructions that are just very poorly done. Most of the info that the distributor states is OK BUT, let's take a look. I'm NOT going point out the differences between the distributors statements vs the instructions. My observations are my own.
1. This is a 110 volt unit and NOT a 220 V as the manual says. The manual states that it MUST be grounded but the unit comes with a 2 prong 110 V plug. The unit has a down-step from AC to 36 V DC that feeds the booster pump that helps the system but not by much.
2. The manual uses all sorts of different measurements and is not consistent.
A. Water pressure in the manual is in MPa. Gauge is in PSI. Different figures for "operating pressure" and "suitable water pressure".? I converted and figured that the best PSI is between 72.5 and 101.5 in order to get close to the 500 gpd. I does work below that but output is going to be lower.
B. Most homes have water pressure at around 45 PSI for city water. Well systems can be adjusted, like I did, but be very careful that you don't start blowing up your plumbing if you boost too high. Our new 1.5 hp well pump is dedicated to and directly to other filters/UV and our RO system and the first unit did not leak when pressure was at 120 PSI for a couple of weeks. We did have to repair other leaks. With the 3 units running we average 90 PSI for each unit with the gauge a little higher before the units. (some fluctuations due to our dirty power that effects the well pump.)
C. The manual states that this unit is for less the 1000 PPM and does not include nor address biological problems. We have pre-filters and UV since our well water is closer to 2000 PPM and we know that we have all sorts of bacteria and stuff in the well water. Our processed water is around 57 PPM that goes into our water cistern. That water is treated AGAIN with filters and another UV since our cistern most likely has outside infiltration via leaching.
D. DUCK... INCOMING? Consumables/filter replacement. (This is gonna hurt.) You will see filter packages that will last you a year. True IF you follow the manual and use their water usage rates.
D1. average family of 3 uses 10L per day. (Drinking water only?) That's 3.3 L per day per person. That's less then a gallon per day per person.
D2. According to other sources; the low average is 80 gallons per person per day that equals 303 L per day per person. This includes drinking water, cooking, bathing and toilet.
D3. Using the RO unit 24/7 the filters, without pre-filters, will need to be replaced every 3 to 5 days. Now the manual starts using "Tons" but I don't know if these are US or Metric tons. Let's use US.
D3a: 1st and 2nd filter is good for 7.5 tons of water. = 2,018 gallons. @ 500 gpd need to change these filers every 4 days. (Without pre-filters. We have an older flushable filter that we back flush twice a week and a larger filter that we change every 2 months so we replace the 1st RO filter once a month.) Monitoring the well water incoming gauge and comparing gauges on the RO units is very helpful to determine when filters might need changing.
D3b: Filters 3 and 4, every 3 to 5 days.
D3c: RO membrane is an unknown but it stated that it is good for 2 to 3 years. ??? That brings us to...
E. "Flushing" the RO membrane? It states that it should be flushed but never gets close to telling you how to do this. @ US $150.00 for a membrane, I'd sure like to know how to extend the life of these. All 3 of them. Edit 9/25. We asked this question and received a quick reply from iSpring ; thank you. This unit has an automatic flush so I don't need to do anything. Nice.
F. This unit can be installed under sink as an On Demand unit. It does have a unit high pressure shut down sensor so when the sink faucet is shut off the unit shuts off. Open the faucet and the low pressure sensor turns it on. This would work well with refrigerator ice makers/water units and several other dedicated facets. It depends on your layout, needs, and what you have to work with. Ours is a full time water production into a 8000 gallon cistern.
G. Buying filters and the RO membrane can be confusing with the way that they are described. Be careful so that you are buying the correct items.
CONCLUSION: I've looked at a lot of systems. To import a system costs us around 38% more then the purchase price. Either we have a water solution that works or?
Please feel free to ask questions or post comments.
![5 out of 5 Stars!](http://123filter-com.b-cdn.net/ac/extensions/123filter/storefront/view/123filter/image/stars_5.png)
2018-04-16
I have been using the RCS5T for over a year as a whole house system. We live in SW Florida. We have a new home and my wife and I are retired. Our well water tests 780 total dissolved solids and over 500 grains of hardness. We use 150 to 200 gal per day, and often more when are kids and grandkids visit -which is often. We also use the RO water to replace evaporated water from the pool. This keeps the pool water in balance better then adding our high calcium well water. We have a five hundred gallon holding tank with I float valve for automatic filling.
We have never run out of water. When we started using the system a little over a year ago the tds was 25. Now it’s running 45. That’s still excellent and I don’t anticipate replacing the RO membrane until tds is in the 80s.
I replace the number 2 and 3 filters every 6 months, and the sediment filter every two months.
I give the RCS5T a five star review. Nick at iSprings has been helpful with the few questions I’ve had.
I highly recommend this system.
![5 out of 5 Stars!](http://123filter-com.b-cdn.net/ac/extensions/123filter/storefront/view/123filter/image/stars_5.png)
2015-10-07
I must say I'm impressed. Our well water has a measured TDS of over 4500PPM untreated. We were running this through several filters and a Culligan water softener and it was still in the 3000+ range. I have a 2500 gallon tank for the well water and from there it goes into our softener and then to the house. I connected this RO system to the incoming water prior to the tank and it is giving us water that is reading 70PPM! I've reduced the amount of softening significantly (5X less salt usage) and the water coming out of the tap is so "soft" that my wife is complaining she can't get her hair rinsed of shampoo. As for the claim of producing less waste water, I don't know. It seems to, just from watching the 2 hoses of the device, but I haven't actually measured the output of the waste compared to the treated water. All in all this is the best $700 I've spent on the house. I might even be able to wash my car now.
It's been almost a year now and the system has worked very well for us. My only complaint is with the waste water hose. It doesn't stand up well to the Arizona sun. I have it going into a vent pipe on the roof and it only takes a few days for it to crack and begin spewing water all over the roof (and then down the side of the house). I have to replace that hose with something that is more UV/heat resistant. But our water is great.
![5 out of 5 Stars!](http://123filter-com.b-cdn.net/ac/extensions/123filter/storefront/view/123filter/image/stars_5.png)
2018-04-19
My buddy Nick asked me if I like it. Here is my answer.
The water taste is exceptional, and I am upset that have not purchased the system years ago. I like the compact design so it fits under sink without any issues. The lack of tank is a great plus since I know the water is always fresh. The productivity of the system is decent, so it fills my coffee pot about 25% faster than my refrigerator filter. I am happy with the purchase and plan to buy another unit for my second home.
There are some CONS that I had to mention: 1) installation instructions are inaccurate is a way that they do not instruct user of three pre filters that are incorrectly installed. These filters are still packed in plastic, but are installed in the systems as if they are ready to use. Instruction does not contains step to disassemble filters, remove wraps, and place them back. So I had to find it in a hard way, after pressurizing the system with water and realizing it does not work. So I had to cut water to the house to discharge the pressure and fix the issue.
2) the system has notable delay before pump starts, so when you want to fill a glass it takes about 15 seconds during which water flows slowly before pump kicks in. I am used to it now, but still consider this an issue with engineering design.
3) the system has no monitoring gadgets that would measure water quality and alert you when it requires attention. If this is optional product add-on I would like to see it.
![5 out of 5 Stars!](http://123filter-com.b-cdn.net/ac/extensions/123filter/storefront/view/123filter/image/stars_5.png)
2019-05-12
I installed this product myself. I am pretty handy so I was able to do it. However, the written directions that come with the product were not terrific (my only real complaint). Luckily the installation is fairly intuitive if you study the included schematics. In addition, the customer service is very good - I spoke to Nick at I-Spring customer service and he was very helpful in answering a few questions. I would recommend adding a tank especially if you also plan to use with the ice-maker kit. I added the the T32M. Now with everything installed my water readings went from over 490PPM on the total dissolved solids coming from the normal tap to 8PPM- outstanding and real peace of mind knowing my family has quality drinking water! By the way we used to use tons of bottled spring water- I measured a bottle at over 150PPM! Really happy with this product so far.
![5 out of 5 Stars!](http://123filter-com.b-cdn.net/ac/extensions/123filter/storefront/view/123filter/image/stars_5.png)
2020-01-21
Simple to install.. we put this on a boat and took RO to each of the bathrooms (Heads)...
Who knows if it really works... but wife is happy.
And.. I'm happy with the quality and ease of installation
![5 out of 5 Stars!](http://123filter-com.b-cdn.net/ac/extensions/123filter/storefront/view/123filter/image/stars_5.png)
2017-06-01
Ok, this thing is amazing, I have owned it now for several months, I use it directly, yes its not as fast as one with a tank, but I can fill as many gallons as I want, which means more to me than how fast it pumps out water... it takes about 2-3 min per gallon, I really haven't timed it, so that is a guesstimate. I plan to buy a 500 gallon tank and turn it into a whole house water reservoir, but for now it serves as clean healthy drinking water.
![5 out of 5 Stars!](http://123filter-com.b-cdn.net/ac/extensions/123filter/storefront/view/123filter/image/stars_5.png)
2018-06-23
I installed this in a residential setting. The system was fairly easy to setup. The instructions could be clearer, but if you take your time you'll get it figured out fairly quickly. While the filters are installed, they still have the packaging on the. Remove the filters and remove this before starting the system up.
Without having a tank it can take 10 to 20 seconds for the pump to kick on and for filtered water to start coming out. A tank would mean instant water pressure. I couldn't figure out how to connect the tank, but Nick quickly responded with some details on the setup. They do respond very fast to email inquiries. I'll likely raise the 4 stars to 5 stars when I get the parts for the tank install.
As for performance, this is the real deal. Our tap water has a TDS of 174. We have 2 refrigerators with filters but they only lowered the TDS to 120-150. The RCS5T lowered the TDS to 17 immediately after installation. Highly recommended over lesser systems.
![4 out of 5 Stars!](http://123filter-com.b-cdn.net/ac/extensions/123filter/storefront/view/123filter/image/stars_4.png)
2018-03-16
18 Months later and we are still going strong. This system has been truly set it and forget it. My TDS is still in the teens, so I don't anticipate replacing the RO membrane until the 3 year mark at least. I'll never buy a big box water filtration system again!
UPDATE: For the price, this system should include a tank. I added a tank and it's worlds better now. Great water pressure on demand. Honestly, this system is probably overkill for a typical home. We may use a few gallons a day, if that, but we no longer suffer the annoyances of a lesser system. Previously, we had a WHER25 system. I added a manual pump, which was obnoxiously loud, to gain some pressure. If we filled one large pot with water, the tank was empty. We had to wait a half hour and endure the loud clicking noises to get more fresh water. No longer, must we suffer through. I expect many years of trouble free service. Also, iSpring has fantastic customer service. E-mailed them some questions, and they got right back with great answers to make things easier. The suggested putting the tank in the line BEFORE the last filter.
This system is fantastically engineered and a breeze to install. It fits perfectly under my sink and gets me less than 10ppm tds. My only complaint is the water pressure. It's fine for the most part, but having a tank would make this system perfect. I'll update again after I've used this a while. First impressions are spectacular.
![5 out of 5 Stars!](http://123filter-com.b-cdn.net/ac/extensions/123filter/storefront/view/123filter/image/stars_5.png)
2018-06-11
We have had an iSpring RCS5T tankless reverse osmosis water filtering system installed in our home in Park City, Utah for over two years. It has functioned perfectly and provides excellent water quality. We have not had any problems with the RO system and the filters are very easy to change. Since it's tankless, it doesn't occupy much space, but still delivers a good stream of water. We love this iSpring product and the customer service provided by Nick at iSpring.
![](image/play.png)
iSpring RCB3P 300 GPD Light Commercial Reverse Osmosis Water System W/Booster Pump and 20"x 2.5" Pre RO Filters
$629.99iSpring F7-GAC 10"x2.5" Standard Reverse Osmosis Water Filter 1-Year Replacement Cartridges, 7-piece
$45.99iSpring F15-500, 500 GPD Tankless RO System Replacement Filter Set, 2-Year Supply, fits RCS5T, White, 15 Piece
$278.99iSpring AFLT4 Automatic Water Filter Lifespan Reminder, Designed for RCC & RCCP Reverse Osmosis Water Filter, Set and Forget
$19.99
- Start DownloadRCS5T Manual