iSpring ICEK-FT15FA15 Universal Refrigerator Filter, Fridge Top Water Filter, 2-stage

Product Features

This universal filter replaces the small proprietary filter cartridge that comes with many refrigerators. The package includes connectors and tubes that you can hook up to any refrigerator with a water inlet. fraction cost of proprietary ones.

Product Highlights

• Double Stages of filtration - removes sediment, chlorine, lead, mercury and other contaminants
• Standard 10 IN. replacement filter cartridge, more available and affordable
• Easy installation with push-to-connect quick fittings
• The upgraded post-filters and alkaline filters come with quick connections and fittings. Please attach the included fittings to the filters and connect the tubings to the fittings. You may discard the old compression fittings.
• 1-year warranty

What's included

1st Stage	FT15IN - 10 IN. inline activated carbon filter 10 IN. -- gets rid of unpleasant chlorine, tastes and odors, cloudiness and colors, Tested by independent third-party to meet NSF/ANSI standard.
2nd Stage	FA15 - Alkaline filter -- producing a pH 8-9 water.
Installation Hardware	1/4 IN. tubing 20 feet (white or blue depending on stock), two 1/4 IN. quick-fitting inline ball valves

How to install?

1. Check if the refrigerator comes with 1/4 IN. tubing on the back (contact us if it doesn't)
2. Shut off water inlet to fridge, draw the left over water from fridge water dispenser to release the remaining pressure
3. Cut the fridge's 1/4 IN. tubing in half (prepare towel or a cup to catch water spill). Cut the 1/4 IN. tubing in this kit in half, cut a piece about 3 inches long
4. Connect these parts to form a circle, starting from one broken end of the fridge's tubing: the inline ball valve, the half of 1/4 IN. tubing in this kit, the FT15, the 3-inch of of 1/4 IN. tubing, the FA15, the other half of 1/4 IN. tubing in this kit, another ball valve, then the other end of fridge's tubing
5. Check to ensure all tubing are inserted into quick-fitting for about half inch deep. Slowly turn on the water inlet, check and fix any leak by fully inserting the tubing
6. Put the whole kit on top of fridge, better to place it in a tray for minimize potential water leak damage (a water leak alarm / water detector is recommended)
7. Draw about 3 gallons of water from fridge water dispenser to flush out carbon dust in the new FT15 or the ice cube may turn dark
8. Enjoy the water!

Specifications & Dimensions

• Water Source: Chlorinated water supplies
• Feed Water Pressure: 20-70 psi
• Feed Water Temperature: 40-100 F (4 - 38 C)
• Max Total Dissolved Solids: 500 ppm
• System Package Dimensions(inch): 5w x 5d x 12h
• System Package Weight : 3 lbs

• Availability: In Stock
• Model: ICEK-FT15FA15
• Manufacturer: iSpring