|
|
iSpring RCB3P 300 GPD Light Commercial Reverse Osmosis Water System W/Booster Pump and 20"x 2.5" Pre RO Filters
-6%
$629.99
$669.99
About this item
- For light commercial use in restaurants, labs, salons, etc. Feed Water Pressure: 22 - 95 psi
- The 20" x 2.5" pre RO filters provide up to 30,000 gallons of filtered water, twice as much as the industry standard 10" filters
- Three 100 GPD RO membranes combine to provide up to 300 gallons of reverse osmosis water per day
- Features a free-standing frame, booster pump, and a built-in pressure gauge
- Compatible with most pressurized storage tanks; tank not included
- Comes with 3/8" fittings
- Lifetime support from iSpring in Atlanta, Georgia; 678-261-7611
Share
Frequently Bought Together
iSpring RCB3P 300 GPD Light Commercial Reverse Osmosis Water System W/Booster Pump and 20"x 2.5" Pre RO Filters
$629.99
-6%
$669.99
$669.99
FPFGFC25X1
F7RB
F7RBY2
F17RCB3P
- Availability: In Stock
- Model: RCB3P
- Manufacturer: iSpring
Write Review
lily | 
2018-01-10
I just received my iSpring RCB3P GPD whole house RO system. I'm not sure what happened during the packaging of this item but the screws for half of the brackets holding the membrane and carbon filters came off so the filters were free floating during shipment and the unit is very heavy. Consequently the faucet end of the Inline Carbon Filter broke off. It took over two weeks to receive the item now I have to contact the manufacturer to get an Inline Carbon Filter replacement before I can even test the unit for other issues. The Inline Carbon Filter appears to be a solid unit with special connections so it doesn't look like I can just go to the store and buy another filter to test the system. There is not any part number on the Inline Carbon Filter so I'm not sure how I'm supposed to replace it every 6 months as recommended. These are questions I need to ask the manufacturer. I purchased the unit with the pump and the power cord looks like the styrofoam melted onto the cord. It doesn't look like the styrofoam should affect the functionality of the unit it's not very appealing. Also, there are color coded stickies that cover the openings where tubing should be inserted. The sticky for the "To water inlet" opening had slipped into the opening and I had a heck of a time getting the sticky out because it stuck to the inside of connection. The stickies should probably be bigger so they can't fall inside the connector openings. The frame of the unit is quite hefty and the motor, pressure gauge, and other electronic items appear to be installed well. I will update my review after I am able to test the unit. This unit cost over $500.00 so the initial issues are very disappointing especially since I have no idea how long it will take to get the broken part. 1/16/18 Update I sent iSpring an email via their Contact Us option from their website late at night after posting the above review.. I received an email from one of their representatives (James) the following day. He has been working with me to resolve the broken Inline Carbon Filter connections. He first had to verify my purchase. He is in the process of shipping me the replacement part now. So at this point iSpring customer service has been very responsive implying that they are concerned about the quality of their products and customer satisfaction. I will provide more feedback once I am able to test the unit. 1/21/18 I received the replacement Inline Carbon Filter on Friday 1/19/18. I was disappointed in that the replacement filter was a 1500 gal rated filter and the original filter was a 3000 gal rated filter. I'm upgrading this to 4 stars, if I hadn't had to deal with the connector issues and if I had known that I needed to do all the reducing and expanding of tube connections I would have given this a 5 star. The following information may help prevent some frustration. I believe that ISpring has some quality control issues since the iSpring RCB3P GPD Commercial Grade Reverse Osmosis Water Filter System w/Booster Pump and Oversized Pre RO Filters unit was damaged upon arrival and the iSpring 20 gal storage tank I purchased was also damaged upon arrival. The damage did not alter the functionality of the units they just caused some frustrations. During the test phase of the RO system I found another connector that had been broken during shipping. I didn't find the second broken connector until about 8:30 PM when I opened the water valve to the RO unit. Very inconvienent running to a parts store when they are all closing. I'm not sure why but the design of this RO unit (RCB3P) has an input of 3/8" OD tubing but the tube size is reduced to 1/4" OD tubing through the membrane cartridges and carbon filter. The output lines to the faucet and storage tank is 1/4" OD. The input to the iSpring 20 gal storage tank is 3/8" OD. I wasn't able to find connectors that reduce from 3/8" OD to 1/4" OD and visa versa so I had to spend a lot of time at hardware stores to find parts to do the trick. This is very frustrating and inconvenient for the customer. I will say that once all the issues were fixed the unit appears to be working well. My TDS reading before the unit was 435 and the TDS reading from the RO faucet is 26. I did run the unit for some time before taking the RO TDS reading since I wanted to flush out all the lines. In addition, the storage tank recommends that the tank be flushed after the first filling. Be sure to run the faucet and tank lines into a bucket or drain before connecting them to the house RO line and tank, this flushes out the lines all the carbon from the carbon filter. On the positive side: I installed a sharkbite pressure guage and a sharkbite shutoff valve just before the reduction from my house 1/2" copper line to the 3/8" OD tubing line. My pressure is slightly over 50 psi going into the unit. Our water pressure from an outside faucet typically fills at 5-6 gal per minute. The RO unit produced about a gal of RO water a minute with about a gal of waste water (to get this information I placed the drain hose in a 5 gal bucket and the RO faucet hose in another 5 gal bucket and timed the test). I'm not sure how this unit works without the booster pump but I highly recommend getting the unit with the pump since all the wiring and other electronics are already installed. Don't be alarmed if the pump appears to run for a long time. Once I started filling the tank It took about two hours for the tank to fill and the unit to pressurize enough to turn off the pump (the gauge on the RO unit read about 1 when the unit turned off). When the unit turns off the water coming out of the waste water line will also stop. Our RO water has no smell or taste so I'm not sure why some of the other reviews had those complaints, maybe they didn't flush the lines and tank and some of the flux or other plumbing chemicals got into their tank and now it's hard to get it out. As I did, I suggest placing both RO output water lines (line to the faucet and line to the tank) into a bucket or drain before connecting the lines to the faucet and tank, this will help remove anything in the lines and avoid contaminating your tank. I ran my unit in this configuration for about 20-30 minutes. It's been one day and now that the unit is working my frustration is quickly diminishing. I'll keep my fingers crossed that the design of the unit is a good design. Good Luck.
2018-01-10
I just received my iSpring RCB3P GPD whole house RO system. I'm not sure what happened during the packaging of this item but the screws for half of the brackets holding the membrane and carbon filters came off so the filters were free floating during shipment and the unit is very heavy. Consequently the faucet end of the Inline Carbon Filter broke off. It took over two weeks to receive the item now I have to contact the manufacturer to get an Inline Carbon Filter replacement before I can even test the unit for other issues. The Inline Carbon Filter appears to be a solid unit with special connections so it doesn't look like I can just go to the store and buy another filter to test the system. There is not any part number on the Inline Carbon Filter so I'm not sure how I'm supposed to replace it every 6 months as recommended. These are questions I need to ask the manufacturer. I purchased the unit with the pump and the power cord looks like the styrofoam melted onto the cord. It doesn't look like the styrofoam should affect the functionality of the unit it's not very appealing. Also, there are color coded stickies that cover the openings where tubing should be inserted. The sticky for the "To water inlet" opening had slipped into the opening and I had a heck of a time getting the sticky out because it stuck to the inside of connection. The stickies should probably be bigger so they can't fall inside the connector openings. The frame of the unit is quite hefty and the motor, pressure gauge, and other electronic items appear to be installed well. I will update my review after I am able to test the unit. This unit cost over $500.00 so the initial issues are very disappointing especially since I have no idea how long it will take to get the broken part. 1/16/18 Update I sent iSpring an email via their Contact Us option from their website late at night after posting the above review.. I received an email from one of their representatives (James) the following day. He has been working with me to resolve the broken Inline Carbon Filter connections. He first had to verify my purchase. He is in the process of shipping me the replacement part now. So at this point iSpring customer service has been very responsive implying that they are concerned about the quality of their products and customer satisfaction. I will provide more feedback once I am able to test the unit. 1/21/18 I received the replacement Inline Carbon Filter on Friday 1/19/18. I was disappointed in that the replacement filter was a 1500 gal rated filter and the original filter was a 3000 gal rated filter. I'm upgrading this to 4 stars, if I hadn't had to deal with the connector issues and if I had known that I needed to do all the reducing and expanding of tube connections I would have given this a 5 star. The following information may help prevent some frustration. I believe that ISpring has some quality control issues since the iSpring RCB3P GPD Commercial Grade Reverse Osmosis Water Filter System w/Booster Pump and Oversized Pre RO Filters unit was damaged upon arrival and the iSpring 20 gal storage tank I purchased was also damaged upon arrival. The damage did not alter the functionality of the units they just caused some frustrations. During the test phase of the RO system I found another connector that had been broken during shipping. I didn't find the second broken connector until about 8:30 PM when I opened the water valve to the RO unit. Very inconvienent running to a parts store when they are all closing. I'm not sure why but the design of this RO unit (RCB3P) has an input of 3/8" OD tubing but the tube size is reduced to 1/4" OD tubing through the membrane cartridges and carbon filter. The output lines to the faucet and storage tank is 1/4" OD. The input to the iSpring 20 gal storage tank is 3/8" OD. I wasn't able to find connectors that reduce from 3/8" OD to 1/4" OD and visa versa so I had to spend a lot of time at hardware stores to find parts to do the trick. This is very frustrating and inconvenient for the customer. I will say that once all the issues were fixed the unit appears to be working well. My TDS reading before the unit was 435 and the TDS reading from the RO faucet is 26. I did run the unit for some time before taking the RO TDS reading since I wanted to flush out all the lines. In addition, the storage tank recommends that the tank be flushed after the first filling. Be sure to run the faucet and tank lines into a bucket or drain before connecting them to the house RO line and tank, this flushes out the lines all the carbon from the carbon filter. On the positive side: I installed a sharkbite pressure guage and a sharkbite shutoff valve just before the reduction from my house 1/2" copper line to the 3/8" OD tubing line. My pressure is slightly over 50 psi going into the unit. Our water pressure from an outside faucet typically fills at 5-6 gal per minute. The RO unit produced about a gal of RO water a minute with about a gal of waste water (to get this information I placed the drain hose in a 5 gal bucket and the RO faucet hose in another 5 gal bucket and timed the test). I'm not sure how this unit works without the booster pump but I highly recommend getting the unit with the pump since all the wiring and other electronics are already installed. Don't be alarmed if the pump appears to run for a long time. Once I started filling the tank It took about two hours for the tank to fill and the unit to pressurize enough to turn off the pump (the gauge on the RO unit read about 1 when the unit turned off). When the unit turns off the water coming out of the waste water line will also stop. Our RO water has no smell or taste so I'm not sure why some of the other reviews had those complaints, maybe they didn't flush the lines and tank and some of the flux or other plumbing chemicals got into their tank and now it's hard to get it out. As I did, I suggest placing both RO output water lines (line to the faucet and line to the tank) into a bucket or drain before connecting the lines to the faucet and tank, this will help remove anything in the lines and avoid contaminating your tank. I ran my unit in this configuration for about 20-30 minutes. It's been one day and now that the unit is working my frustration is quickly diminishing. I'll keep my fingers crossed that the design of the unit is a good design. Good Luck.
PJW | 
2013-05-23
Hill Country Texas
I have a ranch out in the middle of nowhere that is on a shared well system. The water there isn't real bad but is very hard - about 180 ppm total. I decided to buy a new manufactured home out there and didn't really want to be liming up all my new piping. What I ended up doing was building a pump house, installing a shallow well pump to pressurize the water to go into the iSpring 200 GPD Commercial Reverse Osmosis RO Water Filter with Booster Pump. I then go out to a separate 300 gallon tank and back in to re-pressurize to go into the house. (It was a lot of work.)
I finally got to the point that I was ready to make some water and energized everything. My heart kind of sank when I saw the little trickle of water going into the polished water tank. I just left it running and went about my bidness. Checked it about 24 hours later and had a little over 200 gal of product. I've only been running it a couple months now and I only visit the ranch about every other weekend but things are looking great.
I hope to get some samples and take them back to the lab to check. Maybe I can update this post later with results.
2013-05-23
Hill Country Texas
I have a ranch out in the middle of nowhere that is on a shared well system. The water there isn't real bad but is very hard - about 180 ppm total. I decided to buy a new manufactured home out there and didn't really want to be liming up all my new piping. What I ended up doing was building a pump house, installing a shallow well pump to pressurize the water to go into the iSpring 200 GPD Commercial Reverse Osmosis RO Water Filter with Booster Pump. I then go out to a separate 300 gallon tank and back in to re-pressurize to go into the house. (It was a lot of work.)
I finally got to the point that I was ready to make some water and energized everything. My heart kind of sank when I saw the little trickle of water going into the polished water tank. I just left it running and went about my bidness. Checked it about 24 hours later and had a little over 200 gal of product. I've only been running it a couple months now and I only visit the ranch about every other weekend but things are looking great.
I hope to get some samples and take them back to the lab to check. Maybe I can update this post later with results.
huh? |
2019-09-07
Takes my water from 220 ppm to about 6-8ppm. It fills at a rate of 5-6 minutes a gallon. Works well, but it doesn't taste as pure as other R.O. systems I've sampled. It still definitely tastes good. First one arrived with a broken part, it took a week for the replacement to arrive. The replacement arrived in worse looking condition but with all the parts in working order. One of the wires on the motor is loose, but the unit doesn't move, so not a big deal at the moment. If the life of the unit lasts, then it'll definitely be worth the dollars.
2019-09-07
Takes my water from 220 ppm to about 6-8ppm. It fills at a rate of 5-6 minutes a gallon. Works well, but it doesn't taste as pure as other R.O. systems I've sampled. It still definitely tastes good. First one arrived with a broken part, it took a week for the replacement to arrive. The replacement arrived in worse looking condition but with all the parts in working order. One of the wires on the motor is loose, but the unit doesn't move, so not a big deal at the moment. If the life of the unit lasts, then it'll definitely be worth the dollars.
Amazon Customer |
2019-02-24
The RCB3P is an awesome RO filter with a great water production rate. My well water runs 220 - 260 ppm and this filter has reduced the ppm to zero. I use about 30 gallons of RO water daily and this filter produces that amount in about an hour. My unit was missing a couple of minor plumbing connection when it arrived. A phone call to Josh at ISpring and my parts were on their way. Great filter and great customer service.
2019-02-24
The RCB3P is an awesome RO filter with a great water production rate. My well water runs 220 - 260 ppm and this filter has reduced the ppm to zero. I use about 30 gallons of RO water daily and this filter produces that amount in about an hour. My unit was missing a couple of minor plumbing connection when it arrived. A phone call to Josh at ISpring and my parts were on their way. Great filter and great customer service.
GMaier |
2017-12-30
I have been using the iSpring RCB3P 300 GPD now for almost four years. I am extremely satisfied with the quality and ease of replacing the cartridges. I test my water frequently and the system delivers purified water exactly as promised, and at 300+ GPD. It does not contain a storage tank, so it doesn't work during a power outage, but as a commercial grade system which I use every day, I couldn't be more satisfied.
2017-12-30
I have been using the iSpring RCB3P 300 GPD now for almost four years. I am extremely satisfied with the quality and ease of replacing the cartridges. I test my water frequently and the system delivers purified water exactly as promised, and at 300+ GPD. It does not contain a storage tank, so it doesn't work during a power outage, but as a commercial grade system which I use every day, I couldn't be more satisfied.
Nicholas |
2020-12-16
Not sure about thickness, but my cannabis plants sure love it!! Really easy to install. I use it to fill my main water tank which is 300 gallons and it does a superb job. TDS is 5 and starts around 330 TDS, its well water so it varies depending on how much the farmers are pulling out of the ground. Only issue I've had is my heater went out on my greenhouse and the temp outside has been about 7, thankfully we just harvested. The charcoal filter and 2 of the pre membrane filters froze and busted. I sent them an email to buy some new ones, because it was totally my fault, and they sent me 2 filter housings under warranty!! Will definitely stick with them for any other water needs il have in the future and hit up Richard if I need any help!
2020-12-16
Not sure about thickness, but my cannabis plants sure love it!! Really easy to install. I use it to fill my main water tank which is 300 gallons and it does a superb job. TDS is 5 and starts around 330 TDS, its well water so it varies depending on how much the farmers are pulling out of the ground. Only issue I've had is my heater went out on my greenhouse and the temp outside has been about 7, thankfully we just harvested. The charcoal filter and 2 of the pre membrane filters froze and busted. I sent them an email to buy some new ones, because it was totally my fault, and they sent me 2 filter housings under warranty!! Will definitely stick with them for any other water needs il have in the future and hit up Richard if I need any help!
DAVID GARCIA |
2020-01-05
Simplemente genial, deje de comprar agua y mi inversión ya se recuperó con creces
2020-01-05
Simplemente genial, deje de comprar agua y mi inversión ya se recuperó con creces
Terry D. | 
2019-10-13
this unit had two leaking fittings, one cut oring and in less than 24 hours the high pressure switch failed.
2019-10-13
this unit had two leaking fittings, one cut oring and in less than 24 hours the high pressure switch failed.
MamaHow |
2019-02-20
This filter has been perfect. Ive bougt three filters from them and they have all been great. This is the heaviest duty one, and its perfect for light commercial application. Nick was great with after sales service and its very easy to install. I would highly recommend this product and company.
2019-02-20
This filter has been perfect. Ive bougt three filters from them and they have all been great. This is the heaviest duty one, and its perfect for light commercial application. Nick was great with after sales service and its very easy to install. I would highly recommend this product and company.
-
iSpring F3WCB32 2.5” x 20” Whole House Water Filter Replacement Set - One Sediment Cartridge and Two Carbon Block Cartridges - Fits WCB32C & WCB32O
$74.99 -
iSpring F7RB 5-Stage 20 inch Commercial RO 1-Year Supply, Fits RCB2P RCB3P
$95.99 -
iSpring F17RCB3P 5-Stage 20 inch 300GPD Commercial RO 2-Year Supply, Fits RCB3P
$278.99 -
iSpring RCS5T 500 GPD Residential and Light Commercial Tankless Reverse Osmosis Water Filter System with 1.5:1 Pure to Drain Ratio
$519.99 $649.99 -
iSpring RCT600 Tankless High Output Versatile Portable Countertop Reverse Osmosis Water Filter System, 600 GPD RO Membrane, Fits Most Standard Faucet
$299.99 -
iSpring CRO1000 4-Stage Tankless Commercial Reverse Osmosis Drinking Water Filtration System for Restaurant and Small Business, 1000 GPD RO Membrane, 20-Inch Filters 3/4" NPT Inlet
$1,399.99 -
iSpring AFLT4 Automatic Water Filter Lifespan Reminder, Designed for RCC & RCCP Reverse Osmosis Water Filter, Set and Forget
$19.99
-
Start Download
RCB3P Manual
Replacement Filters & Parts
Filters:
Fittings:
Pipes:
Warranty Registration & Help Center
Tell us about your shopping experience
